1. 清新电源首页
  2. 会议信息

第二届传感器,材料与制造业国际会议

2018 2nd International Conference on Sensors, Materials and Manufacturing (ICSMM 2018) will be held in National Taipei University of Technology, Taipei, Taiwan during November 19-21, 2018.

Sensors are widely used in many different applications, and sensor technology has become a basic enabling technology in many instances. The rapid increase in the interest in sensors has been driven by numerous applications, such as intelligent manufacturing processing, in which sensors can provide a large benefit. In addition, sensors are of great importance in safety-related areas, with applications ranging from assessing the integrity of aircraft to monitoring the environment for hazardous chemicals.

New types of sensors are made possible with new materials that are produced using advanced processing technologies. Selected examples of sensor applications and types of sensors were chosen to illustrate the different driving forces and considerations discussed above: technology push, commercial market pull, military applications, life-cycle management, and regulatory demands. These illustrations are not intended to be comprehensive. Rather, they are relevant examples from which the committee identified general conclusions concerning research needs  in sensor materials and the rapid development of sensor technologies for high-payoff applications. Each example describes an application, discusses the key technical issues pertaining to the use of sensors, and identifies key sensor material needs.

ICSMM 2017 was successfully held in Nanhua University, Taiwan during November 24-26, 2017. 2018 2nd International Conference on Sensors, Materials and Manufacturing (ICSMM 2018) will be held in National Taipei University of Technology, Taipei, Taiwan during November 19-21, 2018. We strongly believe that ICSMM 2018 will be a remarkable event which can bring together professors, researchers and students in the field of Sensors, Materials and Manufacturing making the conference a perfect platform to share experience, foster collaborations across industry and academia, and evaluate emerging technologies across the globe.

主要亮点:
1.著名学者教授做大会报告人
陳生明(教授),来自台湾国立台北科技大学;张翼(教授),来自台湾国立交通大学;Norbert Schwesinger(教授),来自德国慕尼黑工业大学。
2. 检索
EI Compendex, Scopus, Inspec等。
3. 考察
我们将于2018年11月21日在台湾国立台北科技大学和台北市内组织学术考察。
出版
被录用的文章将会被发表在:Materials Science Forum期刊,之后会被SCOPUS, EI Compendex,  Inspec等检索,或者发表在International Journal of Materials, Mechanics and Manufacturing(IJMMM)期刊。
会议时间 2018-11-19至2018-11-21
会议地点 台湾
主办单位 台湾国立台北科技大学

本文来自网络,转载旨在知识传播,本文观点不代表清新电源立场。 扫描页面右上角二维码关注微信公众号网络

发表评论

登录后才能评论